Camera 1 is the main cameras for TFH and are located in the center of the room. This cameras are crucial to the success of the service in both worship and preaching.
SETUP
TURN ON CAMERA
CHECK FOCUS WHEEL
Check to make sure focus wheel is functionalCHECK ZOOM DEMAND
Check to make sure zoom demand is functionalSETTINGS
CONTROL
PAN AND TILT LOCK
Pan and tilt for the cameras can be locked via the knobs on the swivel head for the camera.
PAN RESISTENCE
Use the pan resistance button button to make side to side motion easier to handle. Increasing the resistance helps to smooth out "shaky" pans.
ZOOM CONTROL
Zoom control for the camera is a pressure sensitive side-to-side rocker on the right pan-bar handle. There is also a speed control knob to control the overall speed.
VIEWFINDER LCD
SETTINGS:
IRIS: F/4
SHUTTER: 180*
ISO: 1000-1280
FPS: 59.94
FORMAT: 6K 16:9 (normal weekend)
SERMON
During the sermon Camera 1 is the main shot. Cam 1 will follow the speaker at waist level.
Camera 2 will follow panning left and right. Then the TDs will call for a pull or push. Camera 2 will pull out from stage revealing the crowd, or push in to the pastor.
CAM1
Cam 1 will primarily follow the speaker waist up.
Cam 2
Cam 2 during the sermon will focus on pushes and pulls revealing the crowd.
For sermon, Cam 2 should push and pull from Z30-Z10, keeping the top of the LED strips at the top of the frame.